Top of Site > Company Information > Models Sold > Hood, and Hood and Rice
In general, measurements are taken from examples in the editor's collection. If you can supply data for missing models, please help me out. Thank you.
Model
Number |
Screw
Diameter |
Screw
Length |
Jaw Length | Jaw Size | per dozen |
(illegible) | 1 | 22 | 20 | 2 7/8 x 2 5/8 | |
6 | 1 | 20 1/4 | 16 | 2 1/2 x 2 1/2 | |
7 | 1 | 20 | 16 | 2 1/2 x 2 1/4 | |
8 | |||||
9 | |||||
10 | 7/8 | 16 | 14 | 2 1/4 x 1 7/8 | |
11 | 3/4 | 14 | 12 | 1 7/8 x 1 1/2 | |
NR 811 (*) | 3/4 | 12 | 1 3/4 x 1 3/4 | ||
12 | 5/8 | 12 | 10 | 1 3/4 x 1 1/2 | |
13 | 1/2 | 10 | 8 1/2 | 1 1/2 x 1 1/4 | |
14 | 1/2 | 9 1/4 | 7 | 1 1/4 x 1 1/8 | |
too small for mark | 3/8 | 6 | 5 | 1 x 1 | |
too small for mark | 3/8 | 6 | 4 | 7/8 x 3/4 |
(*) Hood shaped jaws, with Narragansett 811 mark, and Narraganset spindles; apparently work in progress when Narragansett bought Hood and Rice.
last revised and validated
Copyright © 1996- Wooden Clamp Journal