Top of Site > Company Information > Models Sold > Stanley, Maker
In general, unless otherwise noted, measurements are taken from catalogs, or examples in the editor's collection. If you can supply data for missing models, please help me out. Thank you.
The clamps with 1/2, 5/8 and 3/4 inch screw diameters are packed 2 dozen in a case; all other sizes, one dozen in a case.
Spindle Length |
Spindle Diameter |
Jaw Length |
W x D Size |
$/doz |
24 |
1 1/4 |
20 |
2 7/8 x 2 7/8 |
$10.50 |
20 |
1 1/8 |
18 |
2 5/8 x 2 5/8 |
$ 8.50 |
18 |
1 |
16 |
2 3/8 x 2 3/8 |
$ 6.50 |
16 |
7/8 |
14 |
2 x 2 |
$ 4.75 |
12 |
3/4 |
10 |
1 5/8 x 1 5/8 |
$ 3.25 |
10 |
5/8 |
8 1/2 |
1 3/8 x 1 3/8 |
$ 2.50 |
10 |
1/2 |
8 |
1 1/4 x 1 1/4 |
$ 2.25 |
This is entitled "The Stanley Rule and Level Company's Catalogue of Tools and Hardware 1870".
This was reproduced by Ken Roberts Publishing Company, Bristol Conn, ISBN=0-913602-04-3, from an original provided by Stanley Tools.
last revised and validated
Copyright © 1996- Wooden Clamp Journal