Top of Site > Company Information > Models Sold > Valley City Clamp Shop, User
In general, measurements are taken from examples in the
collection of the editor, or from dated catalogs.
In this case, the first row of data has been derived from the
loan of a specimen, owned by Lloyd Henley.
A pixel counting tool was used to estimate dimensions
for the other two specimens. (Note also that the larger specimen
is married.)
If you can supply data for other models, please help me out. Thank you.
The Incher Series is the only model series known. I have
pictures of two sizes.
|
Screw Diameter |
Screw Length |
Jaw Length |
Jaw Size D x W |
|---|---|---|---|
|
3/ 4 |
18 |
12 |
1 13/16 x 1 5/8 |
|
5/ 8 |
10 |
8 1/ 2 |
|
|
1 |
17 |
14 1/ 2 |
Note for Henley's model, the extreme length of the screws in comparison to the jaws. The extra six inches (rather than the usual 2 or 4) may indicate that the example is married.
Note also the odd depth of the jaws. This might be shrinkage, or a sign that this dimension was not carefully controlled in the manufacturing process.
Nothing is known about other products of the firm.
last revised and validated
Copyright © 1996- Wooden Clamp Journal