Top of Site > Clamps as Things > Prices for Clamps > 2003 Spring : : Raw Data

Maker, Mark, Model, Condition, Price

These are all the clamps noticed at Spring 2003 Brimfield, on Friday. Ten dealers offered a total of 19 clamps. But not all are included in the analysis.

The items are arranged in sequence, as I found them.

Prices were analyzed only for Poor, Fair, or Good, clamps.

P, F, G indicate Poor, Fair, or Good conditions. (There are no Very Good items this time.)
(I) indicates incomplete, missing one or more parts.
(D) indicates damaged, such as handles cut off, spindles shortened, jaws altered, etc.
(M) indicates married items, usually spindles that do not match jaws. If the clamp is married, then the jaws are used to identify the data.

The range of sizes was from 5 to 17 inches.

Further descriptions can be provided.

maker	mark	model	condition jaws/spindle	offer 1	offer 2
Dealer military goods
NN		I 05 1/ 2	f/g (handcut)	30.
Dealer general. He'd take $100 for the lot.
BM	2LRI	I08	g/g (lathecut)	25.
BM	2LRI	813	g/g (lathe)	25.
NN		I10	g/g (lathe)	25.
B?	obscured	810	f/g (lathe)	25.
NN		I10 1/ 4	f (hand cut) /f (hand)	25.
Dealer general.
B?	obscured	I10	f/g (lathecut)	15.
Dealer general. A pair of identical clamps for $24. total
NN		I06	f (hand cut)/g (hand cut)	15.
Dealer general. The pair for $15.
NR?		I14	f /g	10.
NN		I14	g /I (two teminals)	10.
Dealer general. smaller ones for $10, bigger for $15; the lot for $40
first item is a rarity, HR work in progress finished by NR with NR spindles.
HR x NR	NR O	814	g / D	10.
SN		I17	g/g	15.
BC x UN	2L	I16	f/ f	15.
NN		I16	g/ g	15.
Dealer general
B?	obscured	I10 1/ 4	f/ g	20.
Dealer general
NR	2L, with Owner=Estey	813	p/ f	10.
NN		I06	g/ g	10.
Dealer general
UN		I05 1/ 4	g/ g (all hand made, with handles nailed to shafts	10.
Dealer tools. $20 at opening, and halved every couple hours: 10, 5, to 2 near closing.
AL	AL	I04	g/ I (no central)	2.

last revised and validated